House Budget Estimator
Complete five-level cost and quantity breakdown based on plinth area and floors.
Complete Material Estimator
Calculates volume quantities, materials costs, labor costs, and grand totals.
Concrete Cost & RCC Volume Calculator
Detailed wet/dry volume, material shares, comprehensive cost analysis, safety warnings, recommendations, and sharing options.
Steel Calculator (Bar Bending Schedule Estimator)
Detailed diameter-wise weight and cost breakdown. Enter the number of rods directly in the spreadsheet below.
Steel Reinforcement Spreadsheet (BBS):
| Diameter | Rods Qty (Nos) | Unit Weight | Single Rod Weight | Total Weight | Total Weight (Tons) | Estimated Cost |
|---|---|---|---|---|---|---|
| 8 mm (Stirrups) | 0.395 kg/m | 4.74 kg | 94.7 kg | 0.095 Tons | ₹6,439 | |
| 10 mm (Slabs) | 0.617 kg/m | 7.40 kg | 0.0 kg | 0.000 Tons | ₹0 | |
| 12 mm (Beams/Slabs) | 0.888 kg/m | 10.65 kg | 532.7 kg | 0.533 Tons | ₹36,222 | |
| 16 mm (Columns/Beams) | 1.578 kg/m | 18.94 kg | 189.4 kg | 0.189 Tons | ₹12,878 | |
| 20 mm (Foundations) | 2.466 kg/m | 29.59 kg | 0.0 kg | 0.000 Tons | ₹0 | |
| 25 mm (Heavy Columns) | 3.853 kg/m | 46.24 kg | 0.0 kg | 0.000 Tons | ₹0 | |
| 32 mm (Specialized structures) | 6.313 kg/m | 75.76 kg | 0.0 kg | 0.000 Tons | ₹0 | |
| Total | 80 Nos | - | - | 816.8 kg | 0.82 Tons | ₹55,540 |
- Ensure proper concrete cover for steel: 25mm for slabs, 40mm for beams/columns, 50mm for footings.
- Use standard cover blocks (mortar/plastic) at site instead of stone chips.
- Standard lap length of reinforcement should be 50 × D (Diameter) for tension joints.
Cement Calculator
Calculates cement bags required based on built-up area and concrete mix grades.
Brick Calculator
Calculates numbers of brick units, masonry mortar, cement, sand, and dead weight.
Plaster Calculator
Calculates cement bags, fine sand volume, cost, and water parameters for plaster works.
Tile Calculator
Calculates box counts, adhesive bags, grout bags, and total laying costs.
Paint Calculator
Calculates primer, putty, paint volumes, coats, and labor requirements.
Staircase Calculator
Step counts, structural concrete, reinforcement steel weights, and NBC compliance verification.
Column Grid Planner
Calculates suggested grid alignments, columns counts, structural beams, and rough steel volumes.
Electrical Points Planner
Calculates switches, sockets, fans, conduits, wires, and safety breakers.
Water Tank Calculator
Estimates family daily consumption levels and clean storage sump volumes.
Septic Tank Calculator
Calculates brick masonry walls, excavation dimensions, concrete volume, and safety tips.
Excavation Calculator
Calculates targeted foundation trench excavation volumes, labor days, and cost index.
Footing Calculator
Calculates concrete volume, steel reinforcement weight, and cost for foundation footings.
Wardrobe Plywood Calculator
Accurate list of 18mm, 12mm, 6mm plywood boards, laminates, and cabinet hardware accessories.
Modular Kitchen Calculator
Calculates modular kitchen cabinet boards, layout run, granite, and accessory margins.
False Ceiling Calculator
Calculates gypsum boards, metal channel frames, and joint compound weights.
Complete Interior Calculator
Integrates wardrobes, TV unit, kitchen, false ceiling, and paints costs.
Ayadi Calculator
Vedic perimeter compatibility checking based on standard cubit coordinates.
Vastu Score Calculator
Verify compliance score based on directions of primary habitable zones.
FAR Calculator
Calculates Floor Area Ratio based on plot dimensions and footprints.
Plot Utilization Calculator
Estimates plinth efficiency versus open garden/setback spacing.
Ventilation Calculator
Calculates targeted window-to-floor area ratios to verify ventilation compliance.
Solar Calculator
Estimates panel array quantity and roof surface required based on electrical loads.
Rainwater Harvesting Calculator
Calculates targeted harvesting volume potential based on roof sizes and average monsoons.
Complete House Report Generator
Merges budget, structure, Vastu, services, and modular interior estimates into one professional PDF blueprint.
Construction Health Check
Evaluate the structural efficiency, budget allocation health, and Vastu compliance rating of your project.
Material Consumption Benchmark
Compare your targeted cement and steel values against regional engineering averages to detect structural hazards or budget wastage.
Construction Timeline Planner
Get a phase-by-phase chronological time estimation for your house building project.